Telecom modem configuration

The best services offered by Tim. Have you decided to change your old modem with a newer model to make the most of your internet services offered by Tim?

Yes? We probably need your help to connect to the Internet.

“Excuse me?” I wondered if I had understood correctly. Excellent! If you take a few minutes of your free time and concentrate on reading the following lines, I’m more than sure you won’t regret it and that you will finally understand how to configure the Telecom modem.

I want to assure you that the Telecom modem configuration is not complicated at all, regardless of your knowledge on the subject. You’ll be quick to say that configuring the Telecom modems was a breeze once you followed the step-by-step directions I’m about to give you.

Plug in the modem

The first thing to do is make sure your modem is turned on and connected to your computer. To do this, make sure that the power light on the device is lit next to the power icon, and that the Ethernet cable is plugged into one of the numbered ports on the device.

To verify that the computer is connected to the wi-fi network generated by the device, it is necessary to make sure that the wi-fi connection icon is visible next to the clock in the dedicated area.

Log in to the modem

You can connect to the modem by typing the address in the address bar and pressing the Enter key on your keyboard after performing these steps.

The modem address should be written on the back of the device, so you can find it by looking at it. The modem user manual may contain the Internet address.

In the case of TIM, it is usually possible to access the modem management panel by typing http://alicegate or http://modemtelecom in the address bar. Alternatively, you can try doing something 192.168.1.1 or 192.168.0.1